Automatic plastic capping machien with 6 capping heads3000-6000 bph
This machine is a new product, which based on introducing,
assimilating and absorbing from the domestic and foreign same genus
production, and combined our many year’s experience. It integrated
rinser, filler and capper together, by one motor drive. The
advantages include high degree automation, compact structure, fine
performance, conveniently operating, safety and frequency
conversion changeable capacity, etc. It is an ideal beverage
production equipment in China at present.
Its widely used in round and square glass bottle sealing. For
different type of bottles, we only need to change less bottle mould
alteration parts and adjust the level position partly, then could
meet the client’s requirements.
1,Bottle volume: 350∽1250ml
4,Cap type:Plastic cap
Pure water/Mineral water/Drinking water/Non-carbonated
Suitable bottle Type
3,000 - 6,000bottles per hour(500ml bottle)
High quality SUS304 stainless steel
|After-sales Service||Engineers available to service machinery overseas|
This machine is equipped for most beverage manufacturers. The
machine has characteristics of good rotary cover quality, compact
structure, low noise, and easy maintenance. The single machine has
two components of main spindle and rotating covering.
1. Main Spindle Unit
Main spindle, annular gear, upper ledge, cam, crown sheet and other
parts are all connected with the bedplate of the whole machine
directly or indirectly as non-moving parts. In the figure, gear is
connected with the main shaft, and gear is engaged with the main
transmission gear of the machine, so it rotates with the filling
machine simultaneously. Locating ring, engine body, cover head and
sliding sleeve make rotating movement with the main spindle. As the
annular gear does not move, while cover head and sliding gear shaft
are engaged with the gear ring through the intermediate gear, cover
head and sliding sleeve both rotate themselves and rotate with the
spindle. Sliding sleeve rotates along the cam in the curve groove
with KR35 bearing, making the sliding sleeve and screwing head move
up and down regularly.
2. Rising and Falling of Capping Machine
When bottles with different heights are required for production,
firstly, loosen the screw fixed on the anti-rotating support sleeve
of upright post, then loosen the two screws on the V-type chain,
rotate screw on the upper part of the capping machine, clockwise to
fall and reversal to rise, until it reaches proper position.
Tighten the two crews on the V-type chain, and tighten the two
screws on the anti-rotating support sleeve of upright post.
3. Cover Head and Sliding Sleeve
Working principle: rotary capping and sliding sleeve are connected
as a whole. When it rotates back with the main spindle, the gear of
the screw cap shaft is engaged with the annular gear through
intermediate gear, making it self-rotate and seal the bottle cap
Benjamin Machinery pays great attention to technology, such as beer
processing and filling technology, high-viscosity filling
technology, glass bottle water filling technology. And we will try our best to satisfy your requirement, your message
will be highly appreciated. Welcome to Benjamin Machinery.